Home/Controllers/SB-6500 Series/ExactControl Module
Process control for grinding and dressing. Combine AE sensors and analog signals with configurable strategies to detect contact, monitor dressing and protect the machine.
AE sensor inputs (SB-6560, SB-6560-8)
From gap detection to dress monitoring
For spindle power, RPM or temperature
Plus CNC/PLC hardwire interface
ExactControl monitors grinding and dressing with dedicated AE sensor inputs and general purpose analog voltage inputs, for signals such as spindle power, RPM or temperature.
A Strategy is a ready-made method for evaluating a signal. Combine a strategy with a signal and settings to create an instance, and group instances into jobs for each process. Results go to the CNC through the hardwire, Profinet or OPC UA interfaces.
Reliable workpiece contact detection, even under coolant flow, with a learn cycle that sets the threshold.
AEMS emulation with up to four thresholds and hardware GAP and CRASH detection.
Detects small defects in the dressed form and monitors wheel contour and dressing load.
Monitors time above a threshold, minimum or maximum process time and spindle overload.
Monitors the area under the signal curve, with a teach cycle for a good part.
Detects a sudden change in the input signal.
From the SB-6500 ExactControl operations manual (LL-6600).
| Models | SB-6560: two AE sensor inputs SB-6560-8: eight AE sensor inputs |
| Signal inputs | AE sensors, plus general purpose analog voltage inputs |
| Strategies | ExactDisplay, ExactGap, ExactTime, ExactIntegral, ExactDress, ExactLimit, ExactTrack |
| Communication | Ethernet TCP/IP (OPC UA), Profinet, CNC/PLC hardwire (opto-isolated) |
| Power supply | 22 to 26 VDC, 0.9 A max at 22 VDC |
| Protection | IP30 |
| Mounting | Independently mountable module with DIN clip |
| Operating temperature | 5 to 55 °C |
Send us your application details and an SBS engineer will recommend modules, sensors and balancers for your machine.
