SB-6500 AEMS Module

Acoustic emission monitoring for grinding and dressing. Detect the first wheel contact, stop crashes and monitor process quality.

2 or 8

AE sensor inputs (SB-6522, SB-6522-8)

8 bands

Frequency bands compared in the Learn Cycle

Gap + 4 limits

Plus crash detection

Profinet, OPC UA

Plus CNC/PLC hardwire interface

Listen to the grinding process

An AE sensor on the machine picks up the high-frequency sound of wheel contact. The AEMS module compares that signal with the background level, so it can detect the first contact of the wheel with the part or dresser, abnormal or severe contact, and whether contact stays within limits through the grind or dress cycle.

The CNC uses this to cut air grinding time, protect against crashes and monitor the quality of each cycle.

The Learn Cycle compares background and contact levels across eight frequency bands and suggests the band with the best work-to-air ratio, then sets the gain and limits for you.

Features

Specifications

From the SB-6500 AEMS operations manual (LL-6200).

ModelsSB-6522: two AE sensor inputs
SB-6522-8: eight AE sensor inputs
CommunicationEthernet TCP/IP (OPC UA), Profinet, CNC/PLC hardwire (opto-isolated)
Power supply22 to 26 VDC, 0.9 A max at 22 VDC
ProtectionIP30
Operating temperature5 to 55 °C
CompatibilityWorks with existing SBS cables and sensors

Support and downloads

Installation, operation and specifications in one PDF.

Software for Windows and the Profinet GSDML file.

Pricing, configuration and support from an SBS engineer.

More of the SB-6500 platform

Automatic and manual balancing.

Grinding and dressing process control.

The platform, software and specifications.

Configure SB-6500 AE monitoring for your machine

Send us your application details and an SBS engineer will recommend modules, sensors and balancers for your machine.

Scroll to top